ULTRACOMP Limited                               RED BOX Support Note
Copyright (C) Ultracomp Limited 1997

====================================================================
This information is subject to change without notice and is provided
"as is" with no warranty.  Ultracomp shall not be liable for damages
of any kind arising out of the use of this information.
====================================================================

SUBJECT: Red Box and Windows Sockets (Issue 4)

DATE: 27 January 1997

VERSIONS AFFECTED: 1.31, 1.35

Red Box 1.31 and 1.35 workstation software requires Windows Sockets
v1.1 compliant TCP/IP network software.  Windows Sockets is a de
facto industry standard which is becoming increasingly popular.

Red Box is believed to run correctly with the following TCP/IP
software:

Beame & Whiteside TCP/IP version 3.0c or later.

Frontier Technologies SuperTCP for Windows version 3.0 or later.

Novell LAN WorkPlace for DOS version 4.1 PLUS patch LWP168.
 (Some users report that v4.2 is required)

NetManage Chameleon TCP/IP version 4.00 or later.

Trumpet Winsock version 1.0 revision A, version 2.0 revision B or later.
  (Trumpet version 2.1 revision F is recommended)

Microsoft TCP/IP-32 for Windows for Workgroups version 3.11.
 NOTE: this is not MS-TCP/IP for Windows for Workgroups v1.0.

FTP PC/TCP version 2.2 or later.
 (However, users have reported memory-shortage problems running
  under Windows for Workgroups 3.11)

Sun/ICL PC-NFS version 5.1a plus the pre-release WINSOCK.DLL to
 allow use of blocking hooks. 


All trademarks are acknowledged.


Peter Hanson
Validation and Introduction Manager
Product Development Department
Ultracomp Ltd